✅ Solar Infrared Security Alarm – Complete User Guide

⭐ What this device does

This device detects the movement of a person or object in front of your shop/house and sounds the siren immediately to provide a security alert.

The entire system is solar powered, so there is no hassle of charging.

⸻

🔧 How to use

1️⃣ Installation
• Install the device at a height of 1.5-2 meters on a wall, gate or in front of the shop.
• Place the arrow (→) mark in the direction you want to detect movement.
• No wires - the entire system is wireless.

⸻

2️⃣ Power System (Solar Charging)
• The solar panel on top of the device charges itself.
• When exposed to sunlight during the day, it accumulates enough charge to run for 24 hours.

• No separate charger required.

⸻

3️⃣ Power On / Activate
• Turn on the device — the sensor will start working.
• When motion is detected, the red light will flash and the siren will sound.

⸻

4️⃣ Detection Range
• It can usually detect motion up to a distance of 8-12 meters.

• The detection level (sensitivity) is in four levels — with an increase/decrease option depending on the model.

⸻

5️⃣ Siren System
• The red siren will flash when someone passes in front of the sensor.

• The siren will sound loudly to ensure safety.

⸻

🛡️ Where to use
• Shop front
• House gate
• Garage
• Office entrance
• Farm house / backyard
• Store room

⸻

⚠️ Important Tips
• The sensor should receive direct sunlight.

• It is best not to install it where there is a lot of movement (e.g. leaves, clothes flying).

• No problem even if wet — the device is generally weather-resistant.

• Works automatically at night — no additional lighting is required.